AERMEC PCO5 - Alarm Reset; Gas Alarm Reset

40
19.5 ALARM RESET
To reset the alarms, simply press the key .
Alarms
Warning!
Only reset once.
If fault re-occurs
call assistance!
The list of active alarms can be accessed using the arrows and .
19.6 GAS ALARM RESET
In the machines that use ammable gas, there are some alarms that require a password to be reset. This safety measure guarantees that the machine will be put back into
operation only after the risk conditions have been eliminated by expert and prepared personnel.
U:1AL:067
Gas Leakage
(Enter to reset)
To reset the alarms, simply press the key .
The gas alarms are reset when the correct password is entered.
It is possible to reset the alarms using the dynamic password generated with the token, after activating the function in the Manufacturer menu.
The dynamic password is valid for one reset, then a new token will be generated that will be associated with a new password:
000
2573
0
Alarm Reset Password