Aerospool WT-9 Dynamic - SECTION 3 MAINTENANCE

TECHNICAL DESCRIPTION, OPERATING, MAINTENANCE AND REPAIR MANUAL
SECTION 3
MAINTENANCE
Page
3.1 Overall maintenance survey 3-2
3.2 Daily inspection 3-2
3.3 Pre-flight inspection 3-2
3.4 Inter-flight inspection 3-3
3.5 Post-flight inspection 3-3
3.6 Periodical inspections 3-3
3.6.1 Periodical inspections intervals 3-3
3.6.2 Periodical inspections Sign off sheets 3-3
3.6.3 Periodical inspections – events 3-4
3.6.4 List of periodical inspections of ROTAX 912UL/ S2engine 3-12
3.7 Operating media 3-13
3.7.1 Engine oil 3-13
3.7.2 Coolant 3-14
3.7.3 Brake fluid 3-14
3.7.5 Fuel 3-14
3.7.5.1 Fuelling 3-15
3.8 Lubrication 3-15
3.8.1 Lubrication fundamentals 3-15
3.8.2 Recommended lubricants 3-15
3.8.3 Lubricating points 3-16
3.9 Mechanisms adjustments 3-17
3.9.1 Torque moments 3-17
3.9.2 Necessary maintenance tools 3-18
3.9.3 Inspection holes 3-18
3.10 Brake system 3-18
3.10.1 Brake plate replacement 3-18
3.10.2 Venting 3-19
3.10.3 Brakes adjustment 3-20
3.11 Control surfaces deflections setting 3-20
3.11.1 Aileron deflections adjustment 3-20
Date: 01.03.2002 WT-9 Dynamic Section 3 Page 3 - 1