PAGINA
GCM02-MT-ING4 NEW.doc c/02 04/03/2003 ITA Page 5 of 57
1. USER MANUAL
INTRODUCTION
We congratulate you for having purchased the GC-M02 control panel for handling your generator unit. As you
read through this manual you will realise the outstanding performance and variety of applications offered by
this supremely technological unit.
This electronic microprocessor module not only completely controls the generator and its switching but is also
pre-arranged for the direct serial communication with a PC or, using a GSM unit your generator can be
completely remote controlled from miles away.
The GC-M02 unit is equipped with a complete set of digital testers that are required to monitor all mains,
generator and motor parameters.
To make the control of the unit absolutely comprehensible the manual is split up into two parts, namely:
The first USER MANUAL part has been prepared to provide a clear and simple guide to help you use the
generator rapidly, completely and safely.
1.1 PURPOSE
The manual has been prepared specifically for the user of the generator unit.
Information required for the following is provided:
1. to learn the operational principle of the unit;
2. to interpret the indications given on the electronic control panel;
3. to control it for the various operational requirements;
4. to perform the basic checks required to ensure the efficiency of the generator itself.
Technical or adjustment matters are not dealt with as these involve the installation engineer when setting up
the system.
To Next Page
Loading...
