FILE VER LAST ISSUE LANG. PAGE
GCM02-MT-ING4 NEW.doc c/02 04/03/2003 ENG Page 50 of 57
and to insert the code PUK through the use of a normal telephone GSM.
5) alarm erred PIN: to check the correct insertion of the code PIN in the sector of the "serial regulations."
It is obviously possible to check the gen-set through a personal computer with the projected software adequately to the functions of the GCM-
02. It is possible in fact, once connected to the interested group, to command to distance the STOP, the START or the AUTOMATIC TEST of
the same group. In this case on the display of the GCM-02 following information are visualized respectively:
• START FROM SERIAL COMMAND
• STOP FROM SERIAL COMMAND
• AUTOMATIC TEST FROM SERIAL COMMAND
After 250" of absence of serial communication every command sent from PC is annulled and the GCM02 it takes back the normal operation.
REMOTE COMMAND AND CONTROL BY CABLE
With an easy and cheap CCD, of modular structure suitable for the normal civil installations, it is possible to command and control the GE
through 6 telephone threads; foreseen functions and commands:
1. AUTOMATIC RUNNING
2. FORCED START WITH SUPPLIED POWER
3. LOCKED GEN-SET
4. SIGNALING OF MAINS OR INSERTED GEN-SET
5. ALARM SITUATION WITH ACOUSTIC ALARM BY BUZZER
To Next Page
Loading...
