HI ROLLER - BELT CONVEYORS 2. SAFETY
HI ROLLER, MINI ROLLER, LO ROLLER & HI LIFE 2.6. SAFETY DECALS
P115506 R3 13
2. Decide on the exact position before you remove the backing paper.
3. Align the decal over the specified area and carefully press the small portion
with the exposed sticky backing in place.
4. Slowly peel back the remaining paper and carefully smooth the remaining
portion of the decal in place.
5. Small air pockets can be pierced with a pin and smoothed out using the sign
backing paper.
2.6.2. SAFETY DECAL LOCATIONS AND DETAILS
Replicas of the safety decals that are attached to the equipment and their
messages are shown in the figure(s) that follow. Safe operation of the equipment
requires that you familiarize yourself with the various safety decals and the areas
or particular functions that the decals apply to, as well as the safety precautions
that must be taken to avoid serious injury, death, or damage.
INSTALL NEAR CONVEYOR DISCHARGE
P115508
P115509
P115510
INSTALL
BEHIND
GUARDS ON
MACHINE
P115511
To Next Page
Loading...
