38 Agilent 1100 Series LC/MSD Trap System Quick Start Guide
Agilent methods, data files and report layouts
DataAnalysis methods (VB Scripts and commands) and data
Table of DataAnalysis methods and test data
Automation methods come in the form of scripts and are installed with the Trap
software. You can add a script with the MS part of the method. These scripts
automatically execute after the run if you select to run the script with the method.
You can use some of the scripts listed here as is. Others contain pieces of example
code that show how the different commands are implemented. You can create your
own custom script by combining and modifying these pieces of example code.
The scripts are also attached to sample data files. You can execute the scripts after
loading the data file with Method > Run.
VB Scripts Description Test Data
Add_AllChro.M Script to test AddChromatograms method Add_Chro.d
Add_Chros.M Add chromatogram traces, execute "Find Compounds -
Chromatogram", export the compound list, save the results and
print a report
SulfMS01.d
*
Add_CNL.M Add constant neutral loss chromatogram Add_CNL.d
Add_EIC_2.M Demonstrates all properties of extracted ion chromatograms Add_EIC.d
Add_EIC_ions.M Create, integrate, and print results of a summed EIC of four
target masses
SulfMS01.d*
Add_EICs.M Create, integrate, and print results of four generated EICs SulfMS01.d*
Add_MPC.M Demonstrates all properties of mass position chromatograms Add_MPC.d
Add_TIC.M Demonstrates all properties of total ion chromatograms Add_TIC.d
Add_UV.M Demonstrates all properties of UV chromatograms Add_UV.d
Add_Var.M Demonstrates all properties of acquisition parameter traces Add_VAR.d
Add_Mult.M Creates an array of chromatograms Add_Mult.d
Add_Range.M Demonstrates the 'AddRangeSelection' and
'AverageMassSpectrum' methods
RangeAvg.d
To Next Page
Loading...
Need help?
General
