Agilent Technologies 1260 Infinity VL - Page 126

126 1260 Infinity QuatPump VL User Manual
9 Maintenance
Maintenance of a Pump Head with Seal Wash Option
5
Using the steel side of the insert tool remove the seal wash
gasket and the wash seal from the support ring. The
removed seal will be damaged and cannot be re-used!
6 Using the plastic side of the insert tool press the new wash
seal (spring pointing upwards) into the recess of the
support ring.
7 Place a seal wash gasket in the recess of the support ring.
Put the seal holder on top of the gasket.
8 Place the support rings on the piston housing (pistons not
installed) and snap the pump head and piston housing
together. Note the correct position of the pin on the
support ring.
Seal wash support ring
Wash seal
>chZgiidda
LVh]hZVa
Hjeedgig^c\
Ejbe]ZVY
Hjeedgig^c\
E^hidc]djh^c\