1260 Infinity QuatPump VL User Manual 39
Installing the Pump
3
Flow Connections of the Pump
Flow Connections of the Pump
Tools required p/n Description
8710-0510 Wrench open 1/4 — 5/16 inch
Parts required Description
Other modules
Parts from starter kits
Preparations Pump is installed in the LC system
Toxic, flammable and hazardous solvents, samples and reagents
The handling of solvents, samples and reagents can hold health and safety risks.
➔ When working with these substances observe appropriate safety procedures (for
example by wearing goggles, safety gloves and protective clothing) as described in
the material handling and safety data sheet supplied by the vendor, and follow good
laboratory practice.
➔ The volume of substances should be reduced to the minimum required for the
analysis.
➔ Do not operate the instrument in an explosive atmosphere.
To Next Page
Loading...
Need help?
General
