Agilent Technologies 1260 Infinity VL User Manual

1260 Infinity QuatPump VL User Manual 189
Hardware Information
12
Setting the 8-bit Configuration Switch (without On-board) LAN
Forced Cold Start
A forced cold start can be used to bring the module into a defined mode with
default parameter settings.
If you use the following switch settings and power the instrument up again, a
forced cold start has been completed.
CAUTION
Loss of data
Forced cold start erases all methods and data stored in the non-volatile memory.
Exceptions are calibration settings, diagnosis and repair log books which will not be
erased.
➔ Save your methods and data before executing a forced cold start.
Tabl e 19 Forced Cold Start Settings (without on-board LAN)
Mode Select SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
TEST/BOOT11001001

Agilent Technologies 1260 Infinity VL Specifications

General

Brand	Agilent Technologies
Model	1260 Infinity VL
Category	Laboratory Equipment
Language	English