4-2 Agilent 4155B/4156B User’s Guide Vol.2, Edition 5
Making a Measurement
This chapter describes how to perform sweep measurements, sampling
measurements, and stress force, and consists of the following sections:
•“Connecting DUT”
•“Sweep Measurements”
•“Knob Sweep Measurements”
•“Sampling Measurements”
•“Stress Force”
For details about entry fields on the 4155B/4156B setup screen, refer to Chapter 6.
To satisfy the specifications of the 4155B/4156B and the 41501A/B, you need
minimum 40 minutes warm-up before performing measurements.
To Next Page
Loading...
