Agilent Technologies 4156b

Agilent 4155B/4156B User’s Guide Vol.2, Edition 5 7-31
Data Variable and Analysis Function
Read Out Function
@L2X
Returns the X intercept value (Y=0) of LINE2.
Syntax: @L2X
If LINE2 is horizontal, this function returns invalid data.
@L2Y
Returns the Y intercept value (X=0) of LINE2.
Syntax: @L2Y
If there are Y1 and Y2 axes, this function returns the value for selected axis.
If LINE2 is vertical, this function returns invalid data.
@L2Y1
Returns the Y1 intercept value (X=0) of LINE2.
Syntax: @L2Y1
If LINE2 is vertical, this function returns invalid data.
@L2Y2
Returns the Y2 intercept value (X=0) of LINE2.
Syntax: @L2Y2
If LINE2 is vertical, this function returns invalid data.
@MI
Returns the index number of measurement data at the marker location.
Syntax: @MI
This function can be used in both GRAPHICS and LIST display modes.
If the interpolation mode is enabled in GRAPHICS display and the marker is located
between the measurement data, this function returns a non-integer value.