Agilent 4155B/4156B User’s Guide Vol.2, Edition 5 4-41
Making a Measurement
Sampling Measurements
4. Setting the display mode to show
measurement results. The following tasks
are described:
• To Set up Graphical Display of
Measurement Results (see previous
section)
• To Set up List Display of Measurement
Results (see previous section)
5. Executing the measurement. The
following tasks are described:
• To Output Same Value Before and
After Measurements (see previous
section)
• To Execute Calibration (see previous
section)
• To Cancel Zero Offset (see previous
section)
• To Execute or Stop Measurement (see
previous section)
Results. For example, displayed
graphically.
To Next Page
Loading...
