6-28 Agilent 4155B/4156B User’s Guide Vol.2, Edition 5
Screen Organization
MEASURE Screen Group
• PULSE COUNT
PULSE COUNT field specifies the number of pulses for the sampling
measurement (for sweep measurements, only FREE RUN is available).
• Enter a pulse count value (only for sampling measurements).
• Select FREE RUN or enter 0 (zero) to set continuous pulse output. If either
PGU1, PGU2, or both are set to standby ON on the CHANNELS:
CHANNEL DEFINITION screen, this field is automatically set to free run
mode.
CONSTANT
UNIT and NAME are defined on CHANNELS: CHANNEL DEFINITION screen.
In the SOURCE field, you specify the output value.
To Next Page
Loading...
Need help?
General
