Agilent 4263B LCR Meter Operation Manual
Manual Change
Agilent Part No. N/A
June 2007
Change 1
Add the following note to the “3-c. Turning On the 4263B and Setting the Line Frequency” (page 1-13).
Note
In case the setting of the ac line frequency is not match, there’s any possibility the measurement error will
rise. Make sure the ac line frequency has been set up correctly.
Change 2
Add the following condition to the “Measurement Accuracy” (page 8-3).
5. The ac line frequency has been set up correctly.
○
C
Copyright 2007 Agilent Technologies
To Next Page
Loading...
