Agilent Technologies 53181A - Page 138

Chapter 2 Operating Your Frequency Counter
Preset Values After Power-up and *RST
2-70 Operating Guide
2
Printing on/off yes OFF OFF no
Timebase Parameters
Timebase auto/internal/external no AUTO AUTO no
Expected Frequency
Parameters
Channel 1 expected frequency no ________
3
________
3
no
Channel 2 expected frequency no ________
3
________
3
no
Auto-Frequency Parameters
Channel 1 auto-frequency on/off no ON ON no
Channel 2 auto-frequency on/off no ON ON no
Trigger Calibration Parameters
Channel 1 trigger offset cal no ________
4
________
4
yes, (2048)
Channel 1 trigger gain cal no ________
4
________
4
yes, (1700)
Utility Menu Parameters
Option Timebase cal no ________
4
________
4
yes, (2048)
GPIB address no ________
4
________
4
yes, (3)
Digit separator (radix) no ________
4
________
4
yes,
(USA STYLE)
Baud rate, (RS-232) no ________
4
________
4
yes, (9600)
Parity, (RS-232) no ________
4
________
4
yes, (OFF)
Pacing, (RS-232) no ________
4
________
4
yes, (XON)
DTR, (RS-232) no ________
4
________
4
yes,
(DTR_HIGH)
Calibration Security Parameters
Secure state no ________
4
________
4
yes, (SECURE)
Security code no ________
4
________
4
yes, (53181)
Table 2-6. Agilent 53181A Preset Values (continued)
Description In Save/Recall
Value at *RST
(GPIB Reset)
Value at Power-
Up
In Non-Volatile
Memory