24
Installation at a glance
Tools and supplies for installation
Make sure you have the tools and supplies you need before starting the installation.
Wrenches
❐ One 5/16-inch
❐ One 3/8-inch
❐ Two 7/16-inch
❐ One 9/16-inch
Screwdrivers
❐ T-10 Torx screwdriver
❐ T-20 Torx screwdriver
Tubing
❐ Copper tubing, 1/8-inch diameter (1/4-inch diameter if > 15 feet (4.6 m) long)
❐ Heavy wall, 1/8-inch diameter stainless steel tubing (for liquid CO
2
)
❐ Insulated copper tubing, 1/4-inch diameter, (for liquid N
2
)
❐ Tubing cutter
Fittings
❐ 1/8-inch
SWAGELOK fittings
❐ 1/4-inch
SWAGELOK fittings (for liquid nitrogen and valve actuator air tubing)
❐ 1/8-inch
SWAGELOK Tees
❐ Nuts and ferrules
Traps (optional)
❐ Preconditioned molecular Sieve 5A moisture trap
❐ Hydrocarbon trap
❐ Oxygen trap
Other
❐ Small, flat-blade screwdriver
❐ High-quality electronic leak detector
❐ Insulating material (for liquid nitrogen tubing only)
To Next Page
Loading...
Need help?
General
