Agilent Technologies 7200 - Page 134

134 Troubleshooting and Maintenance Manual
7 Replacement Parts
Pliers, long-nose (1.5-inch nose) 8710-1094
Screwdrivers Flat-blade, large 8730-0002
Screwdrivers Torx, T-10 8710-1623
Screwdrivers Torx, T-15 8710-1622
Screwdrivers Torx. T-20 8710-1615
MS shipping kit G3170-60501
RV5 pump shipping kit G7000-60500
7200 MS Shipping kits G7000-60501
7890 GC Shipping kits G3430-60581
Tweezers, non-magnetic 8710-0907
Wrenches, open-end 1/4-inch × 5/16-inch 8710-0510
Wrenches, open-end 10-mm 8710-2353
Wrist strap, antistatic, small 9300-0969
Wrist strap, antistatic, medium 9300-1257
Wrist strap, antistatic, large 9300-0970
Table 2 4 Ferrules
Description Part number
For the GC/MS interface
• Blank, graphite-vespel 5181-3308
• 0.3-mm id, 85%/15% for 0.10-mm id columns 5062-3507
• 0.4-mm id, 85%/15%, for 0.20 and 0.25-mm id columns 5062-3508
• 0.5-mm id, 85%/15%, for 0.32-mm id columns 5062-3506
• 0.8-mm id, 85%/15%, for 0.53-mm id columns 5062-3538
Table 2 3 Tools (continued)
Description Part number