Agilent Technologies 7200 - Page 135

Replacement Parts 7
Troubleshooting and Maintenance Manual 135
For the GC inlet
• 0.27-mm id, 90%/10%, for 0.10-mm id columns 5062-3518
• 0.37-mm id, 90%/10%, for 0.20-mm id columns 5062-3516
• 0.40-mm id, 90%/10%, for 0.25-mm id columns 5181-3323
• 0.47-mm id, 90%/10%, for 0.32-mm id columns 5062-3514
• 0.74-mm id, 90%/10%, for 0.53-mm id columns 5062-3512
Table 2 5 Miscellaneous parts and samples
Description Part number
Panel, lower RIS G3850-67700
Collision cell gas flow module G3850-67036
GCMS CI/IRM flow module assembly G3850-xxxxx
Pre-assemble cover, transparent, RIS G3850-67701
Vent, grill, left G3850-67703
Pre-assemble panel, analyzer, top G3850-67704
Panel, side left front G3850-67706
Panel, front TOF module G3850-67707
Panel, left side rear G3850-67708
Panel, right side upper G3850-67709
Panel, TOF tube right G3850-67710
Panel, right side front G3850-67742
Panel, rear G3850-67754
Panel, right side lower G3850-67755
Panel, TOF tube left G3850-67756
Table 2 4 Ferrules (continued)
Description Part number