Agilent Technologies 7697A Installation And Startup Guide

40 Installation and First Startup
1 Installation
6
Slide the stainless steel ferrule over the 1/16- inch tube
end of the reducer, then install into the open valve port
(at 10 O’clock). Finger- tighten, then tighten 1/4- turn
more.
WARNING
Wear safety glasses to protect your eyes from flying particles
while handling, cutting, or installing glass or fused silica capillary
columns. Use care in handling these columns to prevent puncture
wounds.

Agilent Technologies 7697A Specifications

General

Brand	Agilent Technologies
Model	7697A
Category	Medical Equipment
Language	English