20
Introducing the Agilent 81101A Pulse Generator
Operating the Agilent 81101A
Operating the Agilent 81101A
This section guides you through the first steps when operating the
Agilent 81101A via the user interface.
NOTE
For information on operating the Agilent 81101A via remote control,
please refer to the Reference Guide, part number 81101-91021.
Switching On the Instrument
After switching on the instrument the display indicates that the
instrument selftest is running. This can take several seconds to complete.
If the selftest fails, you see a flashing E at the bottom of the screen. Press
the HELP key to see a list of the selftest error messages. Use the knob or
the cursor keys to scroll through the list if necessary.
To return to normal operation press HELP again. Note that the selftest
error messages are removed from the error queue after this.
To Next Page
Loading...
Need help?
General
