76
Initial Inspection
Initial Inspection
Inspect the shipping container for damage. If the container or cushioning
material is damaged, keep it until the contents of the shipment have been
checked for completeness and the instrument has been verified both
mechanically and electrically.
WARNING
To avoid hazardous electric shock, do not perform electrical tests
when there are signs of shipping damage to any part of the
instruments outer covers or panels.
If the contents are incomplete, or there is mechanical damage, or if the
instrument does not work as expected within its specifications, notify
the nearest Agilent office. (Please request the latest performance tests
from Agilent.) Keep the shipping materials for inspection by the carrier.
The Agilent office will arrange for repair or replacement without
awaiting settlement.
To Next Page
Loading...
Need help?
General
