To clean the screen
The analyzer screen is covered with a plastic diffuser screen (this is not
removable by the operator). Under normal operating conditions, the only
cleaning required will be an occasional dusting. However, if a foreign
material adheres itself to the screen, do the following:
1 Set the power switch to off ( O ).
2 Remove the power cord.
3 Dampen a soft, lint-free cloth with a mild detergent mixed in water.
4 Carefullywipethescreen.
Caution Do not apply any water mixture directly to the screen or allow moisture to go
behind the front panel. Moisture behind the front panel will severely damage
the instrument.
To prevent damage to the screen, do not use cleaning solutions other than the
above.
To store the analyzer
l Store the analyzer in a clean, dry, and static free environment.
For other requirements, see environmental specifications in the Agilent
89410A Technical Data publication.
Preparing the Analyzer for Use Agilent 89410A
To clean the screen
1-16
To Next Page
Loading...
Need help?
General
