Appendix B 147
SCPI Command Reference
:CALC{1-4}:SRL:IMP:AUTO
:CALC{1-4}:SRL:IMP:AUTO
Syntax :CALCulate{[1]|2|3|4}:SRL:IMPedance:AUTO[:STATe] {ON|OFF|1|0}
:CALCulate{[1]|2|3|4}:SRL:IMPedance:AUTO[:STATe]?
Description For the active trace of channel 1 (:CALC1) to channel 4 (:CALC4),turns ON/OFF the auto
impedance calculation function of the SRL measurement.
Parameters
Query response {1|0}<newline><^END>
Example of use 10 OUTPUT 717;":CALC1:SRL:IMP:AUTO ON"
20 OUTPUT 717;":CALC1:SRL:IMP:AUTO?"
30 ENTER 717;A
Related commands :CALC{1-4}:SRL:IMP:AUTO:CUT on page 148
:CALC{1-4}:SRL:IMP:MAN on page 149
Equivalent key [Analysis] - SRL - Auto Z
Description
ON or 1 (preset value) auto impedance calculation is ON.
OFF or 0 auto impedance calculation is OFF.
To Next Page
Loading...
