1200 Series DAD and MWD User Manual 145
Parts and Materials for Maintenance 9
Tab le 16 Maintenance Parts
Item Description Part Number
1Front cover 5065-9982
2 Control Module G1323B or
Instant Pilot G4208A
G1323-67001
G4208-67001
3 Flow Cells with ID tag. For details see “Standard Flow Cell” on page 146, “Semi-Micro Flow
Cell”
on page 148, “Micro Flow Cell” on page 150, “High Pressure Flow Cell” on page 152 or
“Nano Flow Cells” on page 158
4 Capillary column – detector 380 mm lg, 0.17 i.d., for details see “Accessory Kit” on page 162 G1315-87311
5 Zero dead volume fitting 5022-6515
6 Flow cell door
Screw special for flow cell door
G1315-68707
5022-2112
7 Holmium oxide filter 79880-22711
8 Longlife Deuterium lamp 2140-0813
9 Tungsten lamp G1103-60001
10 Leak funnel 5041-8388
11 Leak funnel holder 5041-8389
12 Clip 5041-8387
13 Corrugated tubing, 120 mm lg, re-order 5 m 5062-2463
14 Teflon Tubing flexible i.d. 0.8 mm (flow cell to waste), see “Accessory Kit” on page 162 5062-2462
Cable CAN to Agilent 1200 Series modules (0.5 m) 5181-1516
Cable CAN to Agilent 1200 Series modules (1 m) 5181-1519
LAN Communication Interface Board (G1369A) G1369-60001
Cross-over network cable (shielded, 3 m long) for point to point connection 5023-0203
Twisted pair network cable (shielded, 7 m long), for hub connections 5023-0202
Analog cable (BNC to general purpose, spade lugs) 01046-60105
Interface board BCD (BCD/external contacts) G1351-68701
To Next Page
Loading...
Need help?
General
