Agilent Technologies G1365B User Manual

1200 Series DAD and MWD User Manual 49
Using the Detector 4
Preparing the HPLC System
1 Turn on the Agilent ChemStation PC and the monitor.
2 Turn on the 1200 series HPLC modules.
3 Start the Agilent ChemStation software (B.02.01). If the pump,
autosampler, thermostatted column compartment and detector are found,
the ChemStation screen should look like shown in
Figure 8.
The System status is red (Not Ready).
Figure 8 Initial ChemStation screen (Method and Run Control)
On-line plot window details window
System status

Agilent Technologies G1365B Specifications

General

Brand	Agilent Technologies
Model	G1365B
Category	Security Sensors
Language	English