1200 Series DAD and MWD User Manual 95
Maintenance and Repair 7
Warnings and Cautions
WARNING
To prevent personal injury, the power cable must be removed from the instrument
before opening the detector cover. Do not connect the power cable to the detector
while the covers are removed.
WARNING
To prevent personal injury, be careful when getting in contact with sharp metal
areas.
WARNING
When working with solvents please observe appropriate safety procedures (for
example, goggles, safety gloves and protective clothing) as described in the
material handling and safety data sheet supplied by the solvent vendor, especially
when toxic or hazardous solvents are used.
CAUTION
Electronic boards and components are sensitive to electronic discharge (ESD). In order
to prevent damage always use an ESD protection when handling electronic boards and
components (see “Using the ESD Strap” on page 97).
WARNING
Eye damage may result from directly viewing the light produced by the deuterium
lamp used in this product. Always turn the deuterium lamp off before removing it.
To Next Page
Loading...
Need help?
General
