Agilent Technologies NovoCyte Quanteon User Manual

Introduction
46 NovoCyte Quanteon Flow Cytometer Operator's Guide
Table 5 Power Switch Light and LED Status Indicator Information
Power Switch
Light
Steady green
Instrument is powered on.
Flashing green
Instrument is performing the shutdown cleaning procedure.
LED Status
Indicator
Green
Normal status.
Orange
Warning. Click on the status bar in the NovoExpress software
to review the warning message.
Red
Errors. Click on the status bar in the NovoExpress software to
review the error message.
NOTE
If warnings or errors occur, follow the instructions in the prompted dialog box, and
refer to Troubleshooting in this guide for troubleshooting methods.
The instrument back side (Figure 19) has a power port, four communication ports
and five fluidic connection ports. The power port is used to supply the power to the
instrument through provided power cord. The communication ports are used to
communicate the instrument with NovoCyte Workstation, NovoCyte Fluidics
Station II and other accessories (e.g. NovoSampler Q). The fluidics connection
ports are used to connect the instrument with instrument reagent containers.
Please refer to Installation in this guide for more details.
Figure 19. NovoCyte Quanteon Instrument (Rear View)
NovoCyte Workstation and Monitor
NovoCyte Quanteon flow cytometer comes with NovoCyte Workstation (i.e.
desktop or laptop computer), a monitor and associated accessories. Microsoft
Windows operating system, Microsoft Office, and NovoExpress software are
preinstalled on NovoCyte Workstation. For more details about the NovoCyte
Workstation, please refer to the computer supplier’s website. For details about the

Agilent Technologies NovoCyte Quanteon Specifications

General

Brand	Agilent Technologies
Model	NovoCyte Quanteon
Category	Laboratory Equipment
Language	English