23
TriScroll 600 Dry Scroll Vacuum Pump
D R A F T 4 / 2 9 / 0
4
12. Remove the snap ring that is holding the
check valve plug in the inboard housing.
13. Remove the check valve plug by installing
an M4 screw and then pulling out the plug.
14. Remove and discard the two O-rings.
15. Using the hemostat pliers, remove the two
check valves, two small springs, one large
spring, two plunger guides and one spacer
from the port in the inboard housing.
TriScroll 600 Disassembly (continued)
To Next Page
Loading...
