MND172201 P a g e | 45 Software Revision 1.4.1
One Disconnect in the System
When there is only one disconnect in the Loop the sensor icon turns
half orange and depending on status of sensor, the other half can be
any of the four colors, green for seed flowing, red for blocked, yellow
for high or low rate or grey for sensor needs cleaning. The Loop will
still operate with one disconnect and will still display the loop status.
Figure 8-2 shows there are 2 blocked sensors, as well as one
disconnect in the system between sensor 4 & sensor 5 with seed still
flowing through the sensors.
Figure 8-3 is showing one blocked sensor and one disconnect
between sensor four and sensor five with sensor four being blocked
and sensor five detecting seed.
Break in Loop 1
Sensor Detecting
Seed
Break in Loop 1
Sensor Blocked
To Next Page
Loading...