Akai MPC2000XL User Manual

Chapter 6: Creating and Editing Sounds
Page 97
Re-sampling
Re-sampling allows you to change the sampling frequency of the sample. This is useful for con-
serving memory or it can be used to ‘creatively’ change the quality of the sound (to ‘dirty it up’ a
little).
From the TRIM, LOOP or ZONE screen, select the Snd: field and press OPEN WINDOW.
Press CONVRT [F3] and select RE-SAMPLE with the DATA wheel.
Press NEXT [F5].
New Fs:
This sets the new frequency of the sample.
Quality:
This sets the quality of the sample.
LOW: Least quality but fastest processing.
MED: Moderate quality and relatively fast processing.
HIGH: Best quality but slow processing.
New bit:
You can change the ‘bit’ resolution here, generally this is best left at 16, but you can experi-
ment with lower settings to get a less clean sound.
New name:
Enter a new name for the sample here with the DATA wheel or drum pads.
Press ENTER [F5] when you have finished.
Press DO IT [F5] to convert the sample.
Note:Note:
Note:Note:
Note: As re-sampling uses program memory, there must be more than 4 programs empty of
data befor re-sampling can be carried out.
........................
......................................................................................................
..........................................................................................................
.....................................................................................................
............................
CLOSE COPYCONVRTDELETE
Sound
 Sound name:Sound name:KICK_OF_1B
<Sound spec.> <Sound spec.> Rate: 44100HzRate: 44100Hz
 Type:MONO Size: 37kbytesSize: 37kbytes
........................................................................................
............................
........................
CANCEL
Convert:RE-SAMPLE
....................................................................................
Convert Sound
NEXT
........................................................................................
............................
........................
New Fs:44100Hz Quality:LOW
New Bit:16bit
New neme:KICK_OF_1B1
....................................................................................
Resample
DO ITCANCEL

Akai MPC2000XL Specifications

General

Polyphony	32 voices
Sampling Frequency	44.1 kHz
Sampling Resolution	16-bit
Memory	2MB standard, expandable to 32MB
Sequencer	Yes
Power Supply	Internal
Type	Sampler
Pads	16 velocity-sensitive pads
Sequencer Resolution	96 PPQN
MIDI	2 MIDI In
Outputs	Stereo Out
Display	240 x 64 backlit LCD
Storage	3.5" floppy disk drive
Effects	Optional effects board
Filters	Digital filters
Inputs	2 x 1/4''
Weight	6.5 kg