Page 54
Chapter 3: Recording Sequences
To start recording, close the window and then hold REC and press PLAY.
Multiple Track Recording
With this mode, multiple tracks can be recorded at the same time.
From the Main Screen (press MAIN SCREEN), move the cursor to the S: field.
Here you can select S for single track recording or M for multiple track recording.
In single track recording mode, only the track currently selected in the Main Screen will be re-
corded. In the multiple track recording mode, a number of tracks can be recorded simultaneously.
If you selected multiple track recording, press OPEN WINDOW to display the Multi Re-
cording Setup screen.
In (MIDI channel input)
Select the MIDI input channel with the CURSOR UP/DOWN keys.
Track
Select the track to be recorded to. If two or more of the MIDI inputs are set to the same track,
MIDI data will be merged onto that track and recorded. Set the Track field to OFF if you do
not want to record.
Out (MIDI channel output)
Select the track with the CURSOR UP/DOWN keys and enter the MIDI output channel with the
DATA wheel. If two or more of the MIDI inputs are set to the same track, they will be merged
and sent out.
.......................................................
..................................................................................................
Sq:01-(Sequence01)
TrMUTE SOLO Tr +
Now:001.01.00
STEP EDIT Tr -
™:120.0(MAS) Timing:1/16 Tsig: 4/ 4Tsig: 4/ 4
Count:OFF Loop: ONLoop: ON Bars: 2Bars: 2
Tr:01-Track-01 ON:YES Pgm:OFF
S:MIDI :10A-Device10:MIDI :10A-Device10 Velo%:100
........................
...........................
......................................................................................................
........................................................................................................
CLOSE
Multi Recording Setup
....................................................................................
To Next Page
Loading...
Need help?
General
