Akai MPC2000XL User Manual

Chapter 4: Editing Sequences
Page 73
Rearranging the tracks
This allows you to rearrange/move tracks within a sequence.
From the the Main Screen, press EDIT [F2] to display the Event Copy screen and press
TrMOVE [F3].
.......................................................
...............
Sq:80-Sequence80
TrMOVE SELECTEVENTS BARS
Select trackSelect track
to move.
Tr:01-(Unused)
Tr:02-(Unused)
Tr:03-(Unused)
USER
Select the sequence in the Sq: field and then move the cursor to the field where the track is
displayed using the CURSOR DOWN key. Select the track that you want to move with the DATA
wheel and press SELECT [F6].
.......................................................
...............
Sq:80-Sequence80
CANCEL
Tr:01-(Unused)
Tr:03-(Unused)
Tr:02-(Unused)
INSERT
The selected track moves to the left. If you rotate the DATA wheel again, the list on the right will
scroll.
.......................................................
...............
Sq:80-Sequence80
CANCEL
Tr:07-(Unused)
Tr:08-(Unused)
Tr:02-(Unused)
INSERT
When you reach the place that you want to insert the track, press INSERT [F6].
.......................................................
...............
Sq:80-Sequence80
TrMOVE SELECTEVENTS BARS
Select trackSelect track
to move.
Tr:05-(Unused)
Tr:06-(Unused)
Tr:07-(Unused)
USER
The track name remains the same as the original and the new track numbers are set in order.

Akai MPC2000XL Specifications

General

Polyphony	32 voices
Sampling Frequency	44.1 kHz
Sampling Resolution	16-bit
Memory	2MB standard, expandable to 32MB
Sequencer	Yes
Power Supply	Internal
Type	Sampler
Pads	16 velocity-sensitive pads
Sequencer Resolution	96 PPQN
MIDI	2 MIDI In
Outputs	Stereo Out
Display	240 x 64 backlit LCD
Storage	3.5" floppy disk drive
Effects	Optional effects board
Filters	Digital filters
Inputs	2 x 1/4''
Weight	6.5 kg