Page 34
Chapter 3: Recording Sequences
Next sequence function
When the cursor is in the Sq: field while a sequence is playing, you can select the sequence to
play next by rotating the DATA wheel. The following window appears when you rotate the DATA
wheel.
Pressing the NEXT SEQ key shows the following screen.
Select the sequence with the DATA wheel. In the above illustration, 02-Sequence02 is played
back after 01-Sequence01 is played to the end. It is possible to play sequences consecutively in
this manner. To stop the Next Sequence function select the number originally selected (the cur-
rently playing sequence in the Next sq: field) or press CLEAR [F5] to clear the entry.
Sq: field
During the stop mode, the sequence that will be played back when the play key is pressed is
displayed.
During the playback mode, the sequence being played back is displayed.
Copying a Sequence
To open the Sequence window select the Sq: field and press OPEN WINDOW.
Press COPY [F5] to open the Copy Sequence window.
Select the sequence that you want to copy (top level) by pressing CURSOR UP and select the
sequence with the DATA wheel.
Select the copy destination (bottom level) by pressing CURSOR DOWN and select the sequence
you want to copy the da ta to with the DATA wheel.
The sequence data will be copied when you press DO IT [F5].
CAUTION: If there is data in the sequence you have selected as the destination, the
data will be erased when you press
DO IT
. Be careful when you are
copying to a sequence with a name other than “Unused.”
When PARAMS [F3] is pressed, only the parameters will be copied to the selected sequence.
The sequence data will not be copied.
.......................................................
..................................................................................................
Sq:01-(Sequence01)
TrMUTE SOLO Tr +
Now:001.01.00
STEP EDIT Tr -
™:120.0(MAS) Timing:1/16 Tsig: 4/ 4Tsig: 4/ 4
Count:OFF Loop: ONLoop: ON Bars: 0Bars: 0
Tr:01-(Unused) ON:YES Pgm:OFF
S:DRUM1:OFF Velo%:100
........................
CLOSE COPY
Sequence name:Sequence name:Sequence01
Default name:Sequence01Default name:Sequence01
....................................................................................
DELETE
......................................................................................................
........................................................................................................
............................
Sequence
........................
CANCELPARAMS DO IT
Sq:01-Sequence01
COPY
Sq:02-(Unused)
....................................................................................
........................................................................................
............................
Copy SequenceCopy Sequence
.......................................................
..................................................................................................
Sq:01-(Sequence01)
TrMUTE SOLO Tr +
Now:001.01.00
Next Sq: 2 Tr -
™:120.0(MAS) Timing:1/16 Tsig: 4/ 4
Count:OFF Loop: OFF Bars: 0
Tr:01-(Unused) ON:YES Pgm:OFF
S:DRUM1:OFF Velo%:100
.......................................................
..................................................................................................
Sq:01-Sequence01
SUDDEN PAD
Now:001.01.00
CLEAR
™:120.0(MAS) Timing:1/16
Next Sq:02-Sequence02
To Next Page
Loading...
Need help?
General
