Chapter 7: Creating and Editing Programs
Page 126
Setting the Voice Overlap
When the same note is generated repeatedly, this can be used to set whether the previous sound
is canceled or overlapped.
...............................................................................................
Pgm: 1 Note:60/C05-OFF
<Envelope>
Attack: 0Attack: 0
Decay:100
Dcy md:END
<Filter>
Freq:100
Reson: 0Reson: 0
PLAY
PARAMS AUTODRUM PURGE
..................
..................
..........................
ASSIGN
Tune:-120
Voice
Overlap:
NOTE OFFNOTE OFF
Select the Voice Overlap: field with the CURSOR keys and select one of the following
three modes with the DATA wheel.
POLY Multiple plays of the sound are assigned to additional voices, allowing
polyphonic overlap. This is useful for sounds like ride cymbals, for which
you don’t want new notes to cut off by old ones.
MONO Multiple plays of the sound use the same voice, terminating the previous
sound and restarting playback of the sound (no polyphonic overlap). This
is useful for producing stuttering effects.
NOTE OFF When the pad is released (or a MIDI Note Off message is received), the
sound is terminated. When the Dcymd: field is set to END, the loop on
sound is set to this mode.
While Voice Overlap: is selected, press OPEN WINDOW.
........................
......................................................................................................
.........................................................................................................
............................
CLOSE PLAY
Mute AssignMute Assign
Note:60/C05-OFF
Mutes off:
Note:49/A07-MID. H.H49/A07-MID. H.H
Note:50/A08-OPEN H.H Note:50/A08-OPEN H.H
.....................................................................................................
While either note set in the Note: field in the lower half of the display is generated, the note is
muted when a note displayed in the upper half of the display is generated. This is convenient
when you want to stop the sound of an open hi-hat with a closed hi-hat.
To turn this function off, select the Mutes off: Note: field and select --/OFF by
rotating the DATA wheel to the left.
To Next Page
Loading...
Need help?
General
