Chapter 7: Creating and Editing Programs
Page 115
Creating New Programs
Open the Program screen, select the Pgm: field and press OPEN WINDOW.
The Create New Program window will open if you press NEW[F3].
........................
CANCEL DO IT
New name:New name:NwePgm-B
MIDI program change: 2MIDI program change: 2
....................................................................................
........................................................................................
...........................
Create Nwe ProgramCreate Nwe Program
•
New name:
This sets the name of the program. Refer to “Renaming a Program” on how to enter char-
acters.
•
MIDI program change:
This sets the program number.
Copying Programs
Open the Program screen, select the Pgm: field and press OPEN WINDOW.
Press COPY [F5] to open the Copy Program window.
........................
CANCEL DO IT
Pgm= 1-NewPgm-APgm= 1-NewPgm-A
Pgm: 1-NewPgm-A
....................................................................................
........................................................................................
...........................
Copy ProgramCopy Program
COPY
Select the program that you want to copy the data to with the DATA wheel.
Press DO IT [F5] to copy the program data.
CAUTION: If there is data in the program you have selected as the destination, the data will
be erased when you press
DO IT
. Be careful when you are copying to a
program with a name other than “no program.”
To Next Page
Loading...
Need help?
General
