Akai MPC2000XL

Chapter 4: Editing Sequences
Page 70
Editing the Duration of a Note
When DURATION is selected in the Edit: field the following screen is displayed.
◆ Left Window
•
Time:
Set the range of the event you want to edit.
•
Notes:
Set the note you want to edit. A pad number will appear if the track is a drum track, and a
note range will appear if the track is a MIDI track. You can directly set the note from a drum
pad or MIDI keyboard.
◆ Right Window
•
Edit sq:/ Tr:
To select the sequence and track that you want to edit.
•
Mode:
Edit the selected parameters according to the following settings.
ADD VALUE This adds the value set in Value: to the current value.
SUB VALUE This subtracts the value set in Value: from the current value.
MULT VAL% This increases or decreases the current value by the percentage
set in Value:.
SET TO VAL This unifies all the parameters to the value set in Value:.
•
Value:
Set the value to be adjusted here.
.................................
Edit:DURATION
DO IT
EVENTS BARS
Time:
001.001.00-001.01.00
Notes:
ALL
Edit sq: 1 Tr: 1
 Mode:ADD VALUE
 Value: 1
TrMOVE USER
.................................
Edit:VELOCITY
DO IT
EVENTS BARS
Time:
001.001.00-001.01.00
Notes:
ALL
Edit sq: 1Edit sq: 1 Tr: 1Tr: 1
 Mode:ADD VALUEMode:ADD VALUE
 Value: 1
TrMOVE USER
Editing the Velocity of a Note
When VELOCITY is selected in the Edit: field the following screen is displayed.
◆ Left Window
•
Time:
Set the range of the event you want to edit.
•
Notes:
Set the note you want to edit. A pad number will appear if the track is a drum track, and a
note range will appear if the track is a MIDI track. You can directly set the note from a drum
pad or MIDI keyboard.