EasyManuals Logo

Akai MPC2000XL User Manual

Akai MPC2000XL
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
Page 53
Chapter 3: Recording Sequences
Settings for MIDI output
To display the MIDI output window, from the Main Screen, select the field shown below.
Then press OPEN WINDOW.
Soft thru:
To set the MIDI channel that MIDI data received at MIDI IN is to be sent out through MIDI OUT.
OFF
MIDI through is turned off.
AS TRACK
In single track recording mode, the MIDI OUT channel will be set according to the setting
of each track.
In multiple track recording mode, the MIDI OUT signal will be sent out as specified in the
Multi Recording Setup window.
OMNI-A
MIDI data received at MIDI IN will be sent out through MIDI OUT A.
During track playback, this data will be merged with the track data.
OMNI-B
MIDI data received at MIDI IN will be sent out through MIDI OUT B.
OMNI-AB
MIDI data received at MIDI IN will be sent out through MIDI OUT A and B.
Device name:
You can name a MIDI device name here after selecting the MIDI channel (01A - 16B). This
setting is common to all sequences.
Panic
This will stop all external MIDI devices from playing (All note off and Reset all controller
messages are sent).
Pressing MONITR [F2] displays the MIDI output monitor, where you can monitor which MIDI
channels are being sent (the black squares above the MIDI channel numbers will flash).
.......................................................
..................................................................................................
Sq:01-(Sequence01)
TrMUTE SOLO Tr +
Now:001.01.00
STEP EDIT Tr -
™:120.0(MAS) Timing:1/16 Tsig: 4/ 4Tsig: 4/ 4
Count:OFF Loop: ONLoop: ON Bars: 0Bars: 0
Tr:01-Track-01 ON:YES Pgm:OFF
S:MIDI : S:MIDI :10A-Device10 Velo%:100
........................
......................................................................................................
........................................................................................................
............................
CLOSE PANICMONITR
MIDI OutputMIDI Output
Soft thru:AS TRACKSoft thru:AS TRACK
Device name:10A-Device10Device name:10A-Device10
....................................................................................
........................
......................................................................................................
........................................................................................................
CLOSE
MIDI Output MonitorMIDI Output Monitor
....................................................................................
OUT A
OUT B

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Akai MPC2000XL and is the answer not in the manual?

Akai MPC2000XL Specifications

General IconGeneral
Polyphony32 voices
Sampling Frequency44.1 kHz
Sampling Resolution16-bit
Memory2MB standard, expandable to 32MB
SequencerYes
Power SupplyInternal
TypeSampler
Pads16 velocity-sensitive pads
Sequencer Resolution96 PPQN
MIDI2 MIDI In
OutputsStereo Out
Display240 x 64 backlit LCD
Storage3.5" floppy disk drive
EffectsOptional effects board
FiltersDigital filters
Inputs2 x 1/4''
Weight6.5 kg

Related product manuals