152 Version 1.21
EDIT SAMPLE
s5000
/
s6000
LOOP TIL REL This will play the sample and will loop for as long as
you hold the key but, as soon as you release the
note, the loop will stop playing and the rest of the
sound (if any) will play through the release phase of
the program’s envelope.
NOTE: It is not possible to loop ‘virtual’ samples. and so it is only possible to select NO
LOOPING or ONE-SHOT for ‘virtual’ samples.
The PLAY MODE’s WINDOW parameter reveals these further parameters:
The parameters are:
LOOP LOCK Once you have set a good loop, you may lock its length and ‘slide’ it
around the sample to see if it sounds better in a different position.
PLAY MODE The PLAY MODE parameter duplicated here for convenience.
LOOP DIRECTION You may set FORWARDS or ALTERNATING:
Original with loop start/end settings
Playback with FORWARD loop
Playback with ALTERNATING loop selected
As you can see, you can get a smoother loop with ALTERNATING
selected in some circumstances. ALTERNATING is particularly useful on
long loops with sounds such as strings, etc.. It can also be useful for
looping decaying sounds such as cymbals or pianos.
To Next Page
Loading...
Need help?
General
