EasyManuals Logo

Akai S5000 User Manual

Akai S5000
292 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #233 background imageLoading...
Page #233 background image
Version 1.21 223
s5000
/
s6000
UTILITIES
MIDI SETUP
This sets up how the S6000 will respond to MIDI. Pressing MIDI SETUP shows this screen:
The parameters are:
PROGRAM CHANGE This applies to remote program selection of programs via MIDI within
parts. It may be switched ON or OFF
MULTI SELECT This allows you to select whether MIDI program change or MIDI bank
change will remotely select multis. Multis may be given MIDI program
numbers in the RENUMBER MULTI page. If BANK is selected, the same
MIDI program numbers are used. Thus, sending a command to change
to bank 2 will cause the multi with MIDI program number 2 to be selected.
MULTI SLCT CH This sets the channel for the reception of program change commands
for remote selection of multis. Of course, this parameter has no effect if
MULTI SELECT is not switched on.
NOTE: When MULTI SELECT is switched on, the selected MIDI channel cannot be used to
remotely select programs in parts. For example, if MIDI channel 16B is selected for remote
selection of multis, you cannot select programs on that channel. This is done automatically.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Akai S5000 and is the answer not in the manual?

Akai S5000 Specifications

General IconGeneral
TypeSampler
Polyphony64 voices
Sampling Rate44.1kHz
Bit Depth16-bit
MIDIIn/Out/Thru
Operating SystemAkai OS
MemoryUp to 256 MB
StorageInternal hard drive, SCSI
Outputs8 individual outputs
FiltersMulti-mode resonant filters
EffectsOptional effects board
FormatsAkai S1000/S3000, WAV, AIFF
Inputs/OutputsSCSI
DisplayLCD

Related product manuals