Version 1.21 185
s5000
/
s6000
RECORD
RECORD ERROR MESSAGES
If you try to record using one of the digital inputs and nothing is connected to it, you will see this
dialogue:
You should either record via the analogue inputs or connect the appropriate digital device.
If the sampler is synchronised to external wordclock (in UTILITIES / SYSTEM SETUP) but the
wordclock is missing, you will see this dialogue:
You should either set SYNC SOURCE (in UTILITIES / SYSTEM SETUP) to INT 44.1kHz or INT
48kHz or connect the wordclock source.
To Next Page
Loading...
