Version 1.21 233
s5000
/
s6000
UTILITIES
MEMORY TEST
Pressing this shows this pop-up:
After a while, you will see something like this dialogue:
This test is mostly for service engineers for diagnostic purposes but you may find it useful to check
how much memory is in your S6000 (especially if you have just installed some SIMMs and want to
check they are correctly seated and recognised by the system). If a slot doesn’t have a SIMM
installed, it will show NOT AVAILABLE; if there is a problem with a SIMM, the appropriate slot will
show FAULTY.
To Next Page
Loading...
