Version 1.21 181
s5000
/
s6000
RECORD
MAKING A RECORDING
Once you have set the parameters described above as appropriate, press ARM (F8). You will see
this screen:
The sampler is waiting for the signal to exceed the threshold level (or receive a MIDI note on). You
may start recording using MANUAL START if you prefer.
Whichever method is used to start recording, you will see this record progress display:
At the end of the recording you will receive this prompt:
The new recording’s waveform will be shown and you may use PLAY NEW to audition it. If you like
it, press KEEP NEW; if you don’t, press DISCARD.
To Next Page
Loading...
