Name: Akai S5000
Brand: Akai
Rating: 4 (1 reviews)

To Next Page

To Previous Page

124 Version 1.21

EDIT PROGRAM

s5000

s6000

FILTER ENVELOPE

Pressing FILTER ENVELOPE in either the MAIN or KEYGROUP page will show this screen:

The parameters and window functions are identical to the AMP ENVELOPE described on the

pervious pages except....

FILTER This takes you directly to the FILTER page.

ENV DEPTH This sets the output level of the FILTER ENVELOPE.

Set to +000, it will have no effect on the filter or on anything else it may

be routed to in the APM modulation matrix.

NOTE: If you are using the FILTER ENVELOPE as a mod source elsewhere in the APM

modulation matrix (for example, if the filter envelope is being used to control, say, pitch), a

value other than +000 needs to be set here otherwise you will not hear the pitch sweep effect.

However, because this parameter also sets the level for the ‘hardwired’ link to the filter, setting

a value appropriate to the pitch sweep effect you want will also affect filter modulation which

may or may not be what you want.

Questions and Answers:

Need help?

Do you have a question about the Akai S5000 and is the answer not in the manual?

Akai S5000 Specifications

General