Akai S5000

Version 1.21 183
s5000 / s6000 RECORD
OVERWRITING AN EXISTING SAMPLE
Using F1, you may select an existing sample to record over. If you do this, you will, of course,
receive a prompt warning you of this.
You should take the appropriate action. If you press NO, the process will be aborted and the
existing sample will remain intact and unaffected. If you press YES, you will be taken to the “WAITING
FOR THRESHOLD...” prompt.
NOTE: If you press YES, this deletes the original sample. As a result, even if you press CANCEL
in the “WAITING FOR THRESHOLD...’ prompt, the damage has been done and the sample
will have been already overwritten. Please proceed with caution when selecting samples to
overwrite.