Akuvox A05 Series - Upload Screensaver

A05 Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
13
To configure the configuration on web Device > LCD > Standby Interface
Display interface.
Parameter Set-up
 ScreenSaver Mode: tick the check box to enable the screen saver
function.
 Sleep: set the screen saver start time range from “5” seconds to “30”
minutes, for example, if you set it as “15 seconds” then the device will go
into screen saver mode in 15 second when there is no operation on the
device or no one is detected approaching
6.5. Upload Screensaver
You can upload screensaver pictures separately or in batch to the device and
to the device web interface for publicity purpose or for a greater visual
experience. To configure the configuration on web Device > LCD > Upload
ScreenSaver interface. You can upload a maximum of 5 pictures, and each
picture will be displayed in rotation according to the ID order with specific
time duration (Time Interval) you set.