Akuvox A05 Series - Volume and Tone Configuration; Volume Configuration

A05 Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
15
you unlock by QR code. If you choose Default, the main screen shows
“ Please look at the screen” as default to remind you unlock by face
recognition.
 QR Code Recognition Interval(Sec): this interval is only available when
you choose QR Code mode. It is recognition of the interval between two
QR codes.
6.7. Volume and Tone Configuration
Volume and tone configuration in A05 access control terminal refers to
Tamper alarm volume, Mic volume and open-door tone configuration.
Moreover, you can upload the tone you like to enrich your personalized user
experience.
6.7.1. Volume Configuration
You can configure the Mic volume according to your need for open-door
notification. Moreover, you can also set up the tamper alarm volume when
unwanted removal of the access control terminal occurs. To configure the
configuration on web Device > Voice > Volume Control interface.
Parameter Set-up:
 Ring Volume: set the ring volume from 0-15 according to your need. The
default volume is 8.
 Tamper Alarm Volume: set the tamper alarm volume from 0-15 according
to your need. The default volume is 8.