Akuvox A05 Series - RTSP Stream Monitoring

A05 Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
42
11.3.RTSP Stream Monitoring
A05 series access control terminal support RTSP stream that allows
intercom devices such as indoor monitor or the monitoring unit from the
third party to monitor or obtain the the real time audio/ video (RTSP stream)
from the access control terminal using the correct URL.
11.3.1. RTSP Basic Setting
You are required to set up RTSP function in terms of RTSP Authorization,
authentication, and password etc., before you are able to use the function. To
configure the configuration on web Surveillance > RTSP > RTSP Basic
interface.
Parameter Set-up:
 Enabled: tick the check box to turn on or turn off the RTSP function.
 Authorization Enabled: tick the check box to enable the RTSP
authorization. If you enable the RTSP Authorization, you are required to
enter RTSP Authentication Type, RTSP Username, RTSP Password on the
intercom device such as indoor monitor for authorization.
 RTSP Authentication Type: select RTSP authentication type between
“Basic” and “Digest”. “Basic “is the default authentication type.
 User Name: enter the name used for RTSP authorization.