Akuvox A05 Series - Network Setting; Configure Device Network

A05 Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
17
7.Network Setting
7.1. Configure Device Network
You can configure the default DHCP mode (Dynamic Host Configuration
Protocol) and static IP connection. Moreover, you can set up IP address,
Subnet Mask, Default Gateway, LAN DNS1 & LAN DNS2. To configure the
configuration on web Network > Ethernet > LAN Port interface.
Parameter Set-up:
 DHCP: select the DHCP mode by checking off the DHCP box. DHCP mode
is the default network connection. If the DHCP mode is selected, then the
access control terminal will be assigned by the DHCP server with IP
address, subnet mask, default gateway, and DNS server address
automatically.
 Static IP: select the static IP mode by checking off the DHCP check box.
When static IP mode is selected, then the IP address, subnet mask,
default gateway, and DNS servers address must be manually configured
according to your actual network environment.
 IP Address: set up the IP Address if the static IP mode is selected.