Akuvox A05 Series - Door Unlock Configuration; Configure RF Card for Door Unlock

A05 Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
26
9.Door Unlock Configuration
A05 series access control terminal offer you three types of door access via
QR code, RF card and Facial recognition. You can configure them on web
interface. Moreover, you can import or exporting the configured files to
maximize your RF card configuration efficiency.
9.1. Configure RF Card for Door Unlock
9.1.1.Configure RF Card on the Web Interface
To configure the configuration on web Access Control > User interface.
Note:
 RF card with 13.56 MHz and 125 KHz can be applicable to the
access control terminal for the door access.
Note:
 Please refer to PIN code access schedule selection for the RF card
user(s)-specific door access.