Akuvox A05 Series - DHCP Provisioning Configuration

A05 Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
54
Parameter Set-up:
 Power On: select “Power on”, if you want the device to perform Autop
every time it boots up.
 Repeatedly: select “Repeatedly”, if you want the device to perform autop
according to the schedule you set up.
 Power On + Repeatedly: select “Power On + Repeatedly” if you want to
combine Power On mode and Repeatedly mode that will enable the
device to perform Autop every time it boots up or according to the
schedule you set up.
 Hourly Repeat: select “Hourly Repeat” if you want the device to perform
Autop every hour.
16.4.DHCP Provisioning Configuration
Auto-provisioning URL can also be obtained using DHCP option which allows
device to send a request to a DHCP server for a specific DHCP option code. If
you want to use Custom Option as defined by users with option code range
from 128-255), you are required to configure DHCP Custom Option on the
web interface. To set up DHCP AutoP with “Custom Option” and “Power on”
mode, on web Upgrade > Advanced > Automatic Autop interface. Click Export
tab in Export Autop Template to export Autop template. Then set up DHCP
Option on DHCP server.